Roof Repair in Palm Beach - Free Roof Inspection, Written Price

Fast, Reliable Roof Repair Across Palm Beach

Roof repair in Palm Beach runs $450-$1,800 for most leak and flashing fixes, and $2,500-$8,000+ when salt corrosion has reached the fastener layer or decking. The island’s salt air attacks roofing materials faster than nearly anywhere else in Palm Beach County, so the repair you need here is rarely the repair a mainland crew would quote. We’re Winslow Windows & Doors, and our Roof Repair team knows which fasteners, flashings, and sealants survive on this barrier island. Call (561) 660-9539 and a live person answers, day or night.

Call (561) 660-9539

Why Winslow Windows & Doors Is Palm Beach’s Preferred Roof Repair Company

Ed Winslow’s name is on the business, and on every job we do in Palm Beach. We’ve walked more South Ocean Boulevard rooftops, more Via Mizner estate gables, and more North End barrel-tile ridges than most crews will see in a career. Homeowners here call us because the first repair actually holds. That matters when the next afternoon squall rolls off the Atlantic and finds the weak spot you thought was fixed.

Every technician who pulls up to a Palm Beach home is background-checked and in uniform. You’ll know who’s at your door before the truck stops. We answer our phones 24 hours a day with a real person, not a voicemail loop, and we give you upfront pricing in writing before any work starts. No surprises on the invoice, no vague estimates, no “we’ll see once we open it up.”

When a Palm Beach homeowner calls about a leak near the Intracoastal side or wind-driven rain on the ocean side, we already know what we’re likely to find. That local knowledge shortens the diagnosis and keeps the repair cost down. And when the repair is done, the Done Right Promise stands behind it. If it’s not done right, we make it right.

Our Roof Repair Services in Palm Beach

Stainless and Hot-Dip Fastener Replacement

Standard galvanized roofing nails corrode at the shingle line within a decade on Palm Beach homes. We see tab loss during routine afternoon squalls because the nail heads have simply rusted away. Our crews replace failed fasteners with Type 316 stainless steel or hot-dip galvanized hardware, the same spec ARCOM’s preservation mindset favors for the island’s Mediterranean Revival estates. This is the repair that stops the leak permanently instead of patching it for another season.

Marine-Grade Flashing and Drip Edge

Standard aluminum drip edges pit and perforate on ocean-facing eaves within five to seven years in Palm Beach. Once that happens, wind-driven rain gets behind the fascia and into the soffit. We install marine-grade aluminum flashing and drip edge, then seal every lap joint with polyurethane sealant rated for continuous saltwater exposure. On Intracoastal-facing properties, the same failure happens slower, but it still happens. We spec the coastal version regardless of which side of the island you’re on.

Leak Detection and Roof Membrane Repair

Palm Beach’s flat and low-slope roof sections collect salt-laden runoff that sits longer than it should around drains and scuppers. We trace the leak to its true source, which is often not where the ceiling stain shows. Then we repair the membrane, reseal the drain hubs, and address the paver joints that held the saltwater against the metal. A leak that gets chased instead of diagnosed is how a $600 repair becomes a $6,000 one.

Ridge Vent and Flashing Corrosion Replacement

Corroded aluminum ridge vents and rusted steel flashing are the most common calls we get from Palm Beach estates built in the 1990s and early 2000s, before coastal-spec materials became standard practice. We replace them with hot-dip galvanized flashing and marine-grade aluminum vents, sealed at every overlap. If your roof is over fifteen years old and you haven’t looked at the ridge line since buying the house, this is worth checking before hurricane season.

Trusted Brands We Service in Palm Beach

Our Palm Beach repair crews work on roofing systems from every major manufacturer, and we keep marine-grade flashing, stainless fasteners, and coastal-rated sealants stocked for fast turnaround on island jobs. For Window Installation in Palm Beach and door work that often accompanies roof repairs on Palm Beach estates, we’re authorized installers for ECO Window Systems, Mr-Glass, and Therma-Tru, among others. If your roof repair exposes rotted window trim or failed flashing around a second-story oceanfront opening, we can often address both in the same visit with a written quote before we begin.

Common Roof Repair Problems We See in Palm Beach Homes

• Corroded galvanized nails at the shingle line. Within eight to twelve years on the ocean side of the island, standard roofing nails lose their heads to salt air. The shingles look fine from the ground, but the first sustained wind lifts whole tabs off.
• Perforated aluminum drip edges on ocean-facing eaves. On South Ocean Boulevard, we’ve documented drip edges with visible holes after six years. Those holes let wind-driven rain behind the fascia board and into the soffit, which rots from the inside out.
• Rusted steel flashing around chimneys and dormers. Mizner-era estates with original masonry chimneys are particularly vulnerable. The flashing rusts where salt spray collects in the mortar joints, and the leak follows the masonry down into the attic.
• Unsealed paver joints trapping salt-laden runoff around roof drains. On flat roof sections above garages and loggias, pavers sit directly over the membrane. Saltwater pools in the joints, corroding the cast-iron drain hubs and creating slow leaks that go unnoticed until the ceiling below stains.

Pricing for Roof Repair in Palm Beach, FL

What Roof Repair Costs in Palm Beach

For context on the full exterior envelope, our Impact Windows in Palm Beach generally run $800-$1,500 per window installed, with impact single-hung units at $900-$1,800, large or custom arched openings at $2,500-$5,000, and whole-home packages starting around $8,000 and running upward of $25,000 on Mizner-style estates with non-standard fenestration. Roof repairs sit at the lower end, but the same principles apply: wind zone, floor height, and material spec drive the number. A second-story ocean-facing roof repair costs more than a single-story repair on the Intracoastal side, because access and salt exposure are worse. We measure, we quote in writing, and the quote is free. No change orders, no “discovered damage” surprises on the invoice.

Florida Pays You Back

If your Palm Beach roof repair is part of a larger wind-mitigation project, Florida programs can reduce your out-of-pocket cost. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including roof-to-wall connections and opening protection. Florida also exempts impact-resistant windows and doors from sales tax, and the federal 25C energy credit can return 30% of product cost on qualifying units, up to $600 per year. Most Palm Beach homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy after a wind-mitigation inspection, which runs $75-$150. Exact numbers come from your insurer and the program administrator, not from us, but we can tell you which upgrades qualify and document everything for your inspection.

Salt Air Decides the Materials, Not the Schedule

Palm Beach is a narrow barrier island with salt air from the Atlantic on one side and the Lake Worth Lagoon on the other. Every parcel sits within a mile of saltwater, and that changes what a roof repair actually is. On the mainland, a flashing repair is a sheet-metal job. Here, it’s a material-spec decision. Standard galvanized roofing fasteners and aluminum drip edges corrode within five to seven years, so we specify Type 316 stainless steel or hot-dip galvanized hardware. ARCOM’s historic-preservation mindset favors the same heavier, more durable materials, because they age with the bronze-clad wood and coral-stone details of the island’s Mediterranean Revival estates. The coastal-spec version of the job costs 30-60% more than the inland spec. The cheap spec costs more within a decade, because you’re paying for the same repair twice, plus whatever water damage happened in between.

On a South Ocean Boulevard estate, our crew found rusted steel flashing and corroded aluminum ridge vents after only six years of salt spray. The owner had already spent $4,100 on two prior patch jobs by mainland crews who used standard galvanized materials. We replaced the flashing with hot-dip galvanized steel, installed marine-grade aluminum ridge vents, and sealed every lap joint with a polyurethane sealant rated for continuous saltwater exposure. We also documented the fastener failure for the owner’s wind mitigation inspection. That’s the difference between a repair that survives Palm Beach and one that doesn’t.

We Also Serve Cities Near Palm Beach

Winslow Windows & Doors provides Roof Repair in Palm Beach and surrounding communities including West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. Call (561) 660-9539 for a free estimate anywhere in the area.

FAQs - Roof Repair in Palm Beach