Awning Windows

Awning Windows in West Palm Beach, FL | Winslow Windows & Doors

Awning windows bring something rare to Florida homes: you can leave them cracked open during a summer downpour and not worry about water coming inside. They’re top-hinged, crank-out windows with laminated impact glass in a weathertight frame, and they’ve become a go-to for West Palm Beach homeowners who want ventilation without sacrificing hurricane protection. We install them every week across Palm Beach County, from El Cid to Ibis, and we’ve seen firsthand how the right awning window changes a room’s airflow and light. If you’re planning a replacement or new build, call (561) 660-9539 and we’ll walk you through what fits your openings.

Call (561) 660-9539

Product Overview - Awning Windows

An awning window hinges at the top and opens outward from the bottom, usually with a hand crank. The sash tilts up like a small canopy, which is where the name comes from. In South Florida, that simple geometry does three jobs at once. First, the outward angle sheds rain away from the opening, so you can vent a bathroom, laundry room, or kitchen during a storm band without water pooling on the sill. Second, the crank mechanism lets you fine-tune how much air comes in, which matters when the sea breeze shifts from east to southeast across West Palm Beach. Third, the closed position seats the sash tightly against the frame, which is exactly what you want when a hurricane is pushing wind-driven rain against your exterior walls.

We stock and install awning windows in both aluminum and vinyl frames. Aluminum gives you the slim sightlines a lot of West Palm Beach mid-century and modern homes call for; vinyl brings strong thermal performance at a friendlier price point for condos and rentals on the mainland side of town. Both get the same laminated impact glass and the same hardware, and both carry the same compliance documentation when ordered as impact-rated units. The frame isn’t an afterthought here – it’s what holds the glazing in place when a windborne 2×4 meets the window, and a flimsy frame turns good glass into a liability. These are engineered as a system, not a sheet of glass dropped into a track.

Technical Specifications

We configure every awning window to the opening it’s going in. Here’s what you can specify on a Winslow Windows & Doors quote:

• Frame materials: Aluminum or vinyl, depending on sightline preference, building type, and budget.
• Glass options: Laminated impact glass with a PVB interlayer (the hurricane-rated core), Low-E insulated glass (for solar control and better energy performance), tinted glass (heat and glare reduction), or clear glass (maximum light, often used on north-facing or shaded walls).
• Finish options: White, almond, bronze, black, and tan. These are stocked colorways that cover most exterior palettes in Palm Beach County.
• Screens: Fixed screen for all-the-time insect protection, or a retractable screen when you want the view unobstructed during open season.
• Sizing: Each unit is ordered to your rough opening; awning windows work especially well in wide, short openings over kitchen counters, in bathrooms, and stacked in hallways or stairwells where a casement would swing into traffic.

Every configuration gets a Miami-Dade NOA or Florida Product Approval number issued per the exact glass, frame, and hardware combination. We include that documentation on your quote so you (or your contractor, or the building department) can verify it before the permit is pulled.

Hurricane & Compliance Performance

If you live in West Palm Beach, you don’t ask “do I need impact windows” – you ask “which impact windows will actually pass inspection and protect the house.” Here’s what matters on this product.

Laminated Impact Glass

The glass is two panes bonded with a PVB interlayer. When something hits it – a branch, a roof tile, a windborne 2×4 at regulatory test speed – the glass may crack, but it stays in the frame. That’s the entire point: no breach, no internal pressurization, no blowout. The interlayer keeps the window a protective barrier even after impact.

Miami-Dade NOA / Florida Product Approval

Each configuration of this awning window carries its own Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not as a blanket certification for every possible size and glass combo. We reference the specific approval on your quote so your permit submittal in West Palm Beach matches what’s actually being installed.

FBC / HVHZ Compliance

The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. West Palm Beach sits squarely in the HVHZ, which is the strictest wind design territory in the state. A window that passes code in Orlando doesn’t automatically pass here – HVHZ compliance is a different standard, and this product is built to it.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That sequence simulates what a window endures across a full hurricane event: the hit, the repeated pressure cycles, and then the aftermath when the frame and hardware are still being asked to perform.

Design Pressure for Your Wind Zone

We match design pressures to your specific wind zone, up to +/-100 – never higher. That ceiling matters. Over-speccing a window beyond the site’s actual wind zone adds cost without adding protection, and we won’t sell you a rating you don’t need on a home in Palm Beach Lakes or a condo on Flagler Drive. You get what the calculations require.

Energy Performance

Low-E and insulated glass options are available for every awning window we quote. The Low-E coating cuts solar heat gain, which is a real thing in a city where the afternoon sun hits the west wall from March through November. Insulated glass adds an air space that improves thermal comfort in air-conditioned spaces. You pick the balance between impact protection and energy performance.

Color & Glass Options

West Palm Beach architecture runs the spectrum from 1920s Mediterranean Revival in El Cid to crisp white coastal contemporary on the barrier island, and the finish you choose should talk to the rest of the house. White is the default for coastal homes and condos – it disappears against light walls and holds up visually to salt air. Almond and tan suit the terracotta and stucco tones you see in older Palm Beach County neighborhoods, where a pure white frame can look too stark against an earth-toned façade. Bronze works on mid-century homes and shaded patios, giving a deeper shadow line that reads more architectural. Black is the current choice for modern and farmhouse-style homes – high contrast against white walls, same as the black window trend nationwide, and it hides hardware well.

On glass: clear glass is right for views and light where heat isn’t a problem. Tinted glass helps on west-facing walls where afternoon glare is brutal – a bathroom or kitchen awning window on the west side of a West Palm Beach house catches serious sun. Low-E insulated glass is the workhorse for rooms you air-condition year-round; it handles the sun without darkening the view. And every glass option gets laminated impact construction when you order it as an impact unit.

Installation by Winslow Windows & Doors in West Palm Beach

An NOA-rated window installed badly is no longer an NOA-rated opening, and we take that seriously. We’ve torn out enough botched installs in West Palm Beach to know exactly how it goes wrong: frames set out of square, flashing lapped the wrong direction, perimeter seals skipped, water finding its way behind the stucco. The product is only half the equation. The other half is the installation, and that’s our work.

Every awning window installation starts with a pre-install inspection of the rough opening. We check the sill for level, the jambs for plumb, and the wall condition behind the stucco or siding before anything gets ordered. If the opening is rotted, out of square, or undersized, we fix it before the window arrives – a step that gets skipped on a lot of West Palm Beach renovations, and it’s usually the step that determines whether the job lasts.

We set the frame level, plumb, and square, then seal the perimeter with AAMA 812 low-expansion foam per AAMA 2400/2410 standard practice. That’s the installation method that keeps wind-driven rain out of the wall cavity during a coastal storm. After the unit is set and trimmed, we run a water test, walk the interior for any sign of moisture, and clean up the site: no glass shards, no old caulk beads, no leftover hardware in the flower bed. We also flag permitting requirements for your West Palm Beach jurisdiction – HVHZ permits here usually require the NOA or FL Product Approval number to be on file, and we make sure your paperwork is in order before the inspector arrives.

One more thing worth knowing: coastal exposure changes the installation details. A house two blocks off the Intracoastal gets more salt, more wind, and more scrutiny than a house in a sheltered inland neighborhood. We account for that with material selection, flashing detail, and hardware choices. It’s the kind of thing you only learn by installing windows in Palm Beach County year after year.

Frequently Asked Questions - Awning Windows

What wind zone and design pressure is the Awning Windows rated for?

Design pressures are matched to your specific wind zone, up to +/-100, and never higher. West Palm Beach addresses fall into the HVHZ, so most installations call for a specific DP rating calculated from the site’s exposure category, building height, and opening size. We run that calculation for every quote and document the required DP on your paperwork.

What is the lead time for an Awning Windows order?

Lead time varies by configuration, frame material, and finish. A standard white aluminum unit in a common size typically arrives faster than a custom vinyl unit in bronze with insulated glass. We provide a lead time estimate when we quote, and we order the moment you approve so the material gets into the queue. Call (561) 660-9539 and we’ll give you a realistic window for what you’re specifying.

Does my permit require a Miami-Dade NOA or Florida Product Approval number?

Yes, in almost every West Palm Beach jurisdiction. The HVHZ requires impact products to carry an NOA or FL Product Approval, and the specific number must match the exact configuration on your quote. We provide that documentation when you order. If a contractor tells you the permit doesn’t need it, question that – the building department will ask.

Can I customize the size or configuration?

Yes, within the product’s engineered limits. Awning windows work well in wide, short openings, and we order them to your actual rough opening dimensions rather than trying to make a stock size work with filler. Multiple awning units can also be mulled together to span a larger opening. Glass, finish, and screen choices are all selectable per opening.

How do I maintain the frame and hardware?

Rinse the exterior frame with fresh water a few times a year, especially if you’re near salt air. We’ll also recommend a light silicone spray on the crank mechanism if the operation feels stiff. Don’t use harsh abrasives on the finish. If anything feels loose or the sash doesn’t seat squarely, call (561) 660-9539 before it becomes a bigger problem.

Get a Quote - Awning Windows in West Palm Beach

If you’re pricing awning windows in West Palm Beach, start with a free on-site measurement. We’ll bring the documentation, walk the openings with you, and put a written quote in your hands that covers the glass, frame, hardware, and installation. Call (561) 660-9539 and tell us about your project. We’ll take it from there.

Written by the team at Winslow Windows & Doors, installing hurricane-impact windows and doors in West Palm Beach, FL since our founding.