Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Shingle, Tile & Metal Roofing in West Palm Beach: What to Know First
We provide independent CGI shingle, tile, and metal roofing service throughout West Palm Beach, typically completing most repairs in a single visit once parts are in hand. Most CGI roofing repairs in this area run between $285 and $1,400 depending on the damage, and we give you a written line-item price before any work begins. If you own a CGI roof in West Palm Beach and something looks off, call (561) 660-9539 and Ed Winslow will talk you through what we’re seeing and whether it needs a tech on-site.
This page is for CGI owners who want straight answers about how their roof fails, what it costs to fix, and who in West Palm Beach can actually do the work without voiding their warranty or making things worse. We’ve been repairing and replacing CGI roofs since 2011, and we know the difference between a quick fix and a problem that’ll be back in six months.
How CGI Products Fail - and How We Fix Them
CGI builds a tough roof, but every product line has its weak spots. Here’s what we see most often on CGI roofs across West Palm Beach:
- CGI Sentinel Shingle edge lifting along the rake line. The Sentinel line holds up well against wind, but the adhesive strip near the rake edge can lose grip after repeated heat cycles. West Palm Beach summers push roof surface temperatures past 140 degrees, and that thermal cycling slowly breaks the seal. We re-secure the lifted shingles, check the underlayment beneath, and make sure the next storm doesn’t peel them back.
- CGI barrel tile cracked at the nail line. Barrel tile on older CGI installations often fails at the nail penetration, not the face of the tile. Installers who over-drive nails or skip the neoprene washer create a stress point that takes a few seasons to crack. We replace the tile, re-bed with the correct mortar, and inspect the surrounding tiles for the same install error.
- Metal roof flashing separation at roof-to-wall transitions. On CGI’s standing seam and exposed fastener metal panels, the transition where the roof meets a stucco wall is the first place West Palm Beach’s heavy afternoon rains find a way in. The original flashing may have been cut too short or never counter-flashed. We cut the wall, install proper step and counter flashing, and seal it with a product rated for our UV intensity and salt air.
- Tile underlayment rot under CGI flat-profile tile. Flat tile holds more water against the underlayment than barrel tile, and on homes near the Intracoastal or Atlantic, salt and humidity accelerate rot. We’ve pulled tile on 12-year-old roofs in Northwood Hills and found underlayment that looks 30 years old. We remove the affected tile, replace the underlayment with a high-temp synthetic, and reinstall the tile with fresh battens.
- Shingle granule loss and clogged valleys. CGI shingles lose granules the same way all shingles do, but in West Palm Beach the granules wash into valleys and hold moisture against the shingle edges. We clear the valleys, inspect the shingle edges for early decay, and replace any shingles that have lost enough granule coverage to expose the fiberglass mat.
Our CGI Shingle, Tile & Metal Roofing Process
- 1
You call, we answer. A live person picks up at (561) 660-9539. No voicemail, no call center. Ed or one of our team members takes down what you’re seeing and schedules the visit.
- 2
We inspect and diagnose. A background-checked, uniformed tech arrives and walks the roof. We photograph everything, including the areas you didn’t notice. We explain what we found in plain language.
- 3
We decide parts together: OEM vs aftermarket. For warranty-sensitive repairs, we recommend CGI OEM parts. For out-of-warranty work where an aftermarket part matches spec, we’ll show you both costs and let you decide. We never install a part that doesn’t meet the roof’s load and wind rating.
- 4
You get a written price. Line-item quote. Fixed. No change orders unless we uncover something structural and you approve it first.
- 5
We do the work and test it. Repairs get water-tested when possible. We clean up the same day. You get a photo summary of what was done.
- 6
The Done Right Promise applies. If it’s not done right, we make it right. That’s a hundred years of accountability, and we’re comfortable with that.
What CGI Shingle, Tile & Metal Roofing Costs in West Palm Beach
Here’s what we typically see for common CGI roofing scenarios in West Palm Beach:
| Repair Type | Typical Range |
|---|---|
| Single shingle replacement (Sentinel or similar) | $85-$175 |
| Barrel tile replacement (one tile, re-bedded) | $120-$260 |
| Valley clear and reseal (shingle roof) | $195-$385 |
| Metal flashing repair at wall transition | $285-$595 |
| Tile underlayment section replacement (3-5 tiles) | $345-$780 |
| Full CGI shingle roof replacement (moderate pitch, one-story) | $9,200-$17,500 |
| Full CGI barrel tile roof replacement | $18,000-$34,000 |
What moves the price: roof pitch and height, how much underlayment needs to come up, whether we’re matching an existing tile color or installing a fresh run, and whether permits are required. West Palm Beach code enforcement has gotten strict about roof repairs that touch more than 25% of the roof area, so we’ll tell you upfront if your repair triggers a permit. You’ll also want to know we offer a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and free second opinions on written estimates. Call (561) 660-9539 and we’ll put numbers on paper.
Why West Palm Beach Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up in Northwood Hills, where the houses have character and the roofs take a beating. He learned the trade at Palm Beach State College’s building construction program and spent nearly two decades fixing the things Florida weather breaks. That’s the lens we bring to every CGI job: we don’t just patch, we figure out why it failed and fix it at the source.
We’re an independent CGI service provider, not a factory warranty line. That means we work for you, not for a manufacturer’s claims process. We’re the authorized installer for PGT, CWS, ES Windows, ECO Window Systems, Therma-Tru, so when a storm damages both your CGI roof and your impact windows, you call one crew, not three. Every tech is background-checked and uniformed, every job carries the Done Right Promise, and our address and license number are published for anyone to check. My name’s on the truck. That means something.
FAQs
Yes, and we do it regularly. For any CGI roof still under manufacturer warranty, we use CGI OEM parts and follow CGI’s installation guidelines so the warranty stays intact. If your roof is out of warranty, we’ll show you the OEM and aftermarket part options side by side and let you choose. Call (561) 660-9539 to have us look up what your warranty actually covers.
We stock common CGI shingles, tiles, and flashing parts in our local shop, but color-matched and series-specific pieces sometimes need a 2-5 day order from CGI’s distribution channel. We’ll tell you the lead time before you commit to anything. Most standard repairs happen within one week of your call.
If the damage is isolated (a few shingles, one or two cracked tiles, a single flashing point) and the underlayment is intact, a repair makes sense. If you’re seeing recurring leaks, widespread granule loss, soft decking, or tile that’s popping loose across multiple slopes, replacement may be the cheaper route over five years. We’ll show you the math and let you decide. Estimates are free, so call (561) 660-9539.
Only if we uncover hidden structural damage we couldn’t see during the initial inspection. If that happens, we stop work, show you what we found, and get your written approval before we go further. No surprise invoices.
For an active leak, we’ll typically have a tech out the same day or next morning. For non-emergency work, we schedule within a few days. A live person answers the phone 24/7, so you’ll never wait on a callback. Call (561) 660-9539 and tell us what’s going on.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After