Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Window Installation: The West Palm Beach Owner’s Guide
CGI window installation in West Palm Beach typically runs $95 to $185 per window for straightforward sash, balance, or hardware work, while full-frame CGI window replacement starts around $900 and climbs based on size and impact ratings. Most common parts are on our trucks, so a single visit usually gets your CGI window working again. If you’re reading this, chances are you’ve got a CGI window that won’t stay up, won’t seal, or just doesn’t close like it used to – and you want to know what it’ll cost to make it right without guessing.
Here’s the thing about CGI windows: they’re built for hurricane country, and West Palm Beach puts them through it. Salt air, summer humidity that never quits, and the occasional storm cycle mean parts wear out on a schedule our local weather sets, not a spec sheet in Miami. We’ve been installing and repairing CGI products in West Palm Beach since 2011, and we know exactly which components fail first on which series. This page covers the repair and installation side honestly, with real numbers.
Key Takeaways:
- Most CGI window installation work in West Palm Beach is a one-visit fix, not a project.
- OEM CGI parts are available; for certain components, a quality aftermarket equivalent saves real money with no durability penalty.
- Full replacement cost depends on series, size, and whether you’re matching existing impact ratings.
- Winslow Windows & Doors installs CGI, PGT, CWS, and ES Windows products – and we stock common CGI service parts on our trucks.
Which CGI Models This Applies To
CGI makes several window series, and the right part depends on exactly what you have. The main lines we work with across West Palm Beach are the Estate Collection, Estate Entrances, Sentinel, and Targa series. Within each, two looks for the same frame size can take different balances and different sash hardware, so the label matters. Look in the upper corner of the sash frame or on the edge of the panel itself. You should see a CGI sticker with the series name, glass make-up, and a manufacturing code. That sticker answers more questions than any photo will.
One compatibility gotcha we run into regularly: CGI changed balance designs between early 2000s production and current runs. An older Estate window may need a different balance shoe than a new one, even if the visible dimensions match. We measure the shoe and the channel, not just the sash, before we reach for a part. On the OEM vs aftermarket question, our honest position is this: seals, gaskets, and balance assemblies have excellent aftermarket options we’ve tested and trust. Impact glass, laminated interlayers, and structural frame components should always come from CGI – that’s where the hurricane rating lives, and no offshore equivalent carries the same certification.
Winslow Windows & Doors is an independent service provider and is not affiliated with CGI Windows & Doors.
Signs Your CGI Window Installation Is Failing
- The sash drops when you let go. That’s a worn balance or a broken balance shoe. In West Palm Beach humidity, coil balances corrode internally and lose tension. A window that slams shut isn’t just annoying – it’s going to crack the frame at the sill corner if it keeps happening.
- You can feel air moving around the sash when it’s closed. The weatherstripping has compressed or the keeper isn’t pulling the sash tight. That’s how the humidity gets in, and once the interior seal fails, you’ll see condensation between the panes next.
- The window struggles to slide or takes real muscle. Dirt and salt buildup in the track happens fast near the Intracoastal. If it’s gotten to the point where the track is scored, the frame channel may need reconditioning before new hardware goes in.
- The lock or keeper is loose, and the handle spins past its stop. The internal latch mechanism has stripped. This is one of the most common calls we get after a storm season – a window that wouldn’t lock suddenly had the owner putting more muscle into it every night.
- You hear a rattle when the wind gusts, even when the window is locked. The sash isn’t seating against the frame. On CGI impact windows, that rattle means the wind is working on the seal, and the next thing to go is the weatherstripping, then the mechanism itself.
Replacement Cost & What’s Included
In West Palm Beach, expect $95 to $185 per window for common CGI service parts like balances, shoes, keepers, latches, and weatherstripping – installed. Window opening hardware that has to be matched to a specific series runs $150 to $260. Full-frame CGI window replacement starts around $900 and moves past $2,400 for larger openings or higher design pressures. Glass replacement on an impact-rated CGI panel runs $450 to $950, depending on size and glass type.
What’s included in our pricing: the part, the labor, and a written line-item quote before we start – no change orders and no surprises on the invoice. Every CGI installation job is backed by the Done Right Promise. If it’s not done right, Ed Winslow makes it right. That’s a hundred-year standard, and Ed’s name is on the door – and on every job we do. We’ll also give you the old part back if you want to see what failed.
Every customer gets a free estimate, and if you’re inside our home county, there’s no trip charge. We don’t believe you should pay to find out what it costs.
DIY or Call Us?
You can safely check a few things yourself. Look at the label on your sash and write down the series. Check whether the window operates the same from both sides. Note if the problem gets worse in the heat of the afternoon versus the cooler morning – that detail tells us a lot about thermal expansion and whether the part is worn or the frame is shifting.
What we’d rather you not do is try to pull a CGI sash out of the frame without knowing how the balance system releases. These are heavy impact-rated sashes, and the balances are under enough tension to hurt you if they let go the wrong way. That’s not scare talk – it’s just the honest truth of working with hurricane-rated windows. If you’re not sure whether your window is safe to poke at, call (561) 660-9539 and describe what it’s doing. We’ll tell you over the phone whether it’s something to touch or something to leave alone until we get there.
Sometimes the simplest fix is still a ten-minute job for someone who’s done two thousand of them. Ed’s name is on the truck. That means something.
FAQs
CGI impact windows run 20 to 30 years in West Palm Beach’s climate before the frame or glass needs serious attention, but hardware parts like balances and keepers typically last 7 to 12 years in coastal air. Homes within a mile of the Intracoastal or ocean see noticeably shorter hardware life because the salt works the internal springs faster. Call (561) 660-9539 if you’re unsure whether your issue is hardware or the window itself – we’ll give you an honest read.
It depends on the part. Balances, weatherstripping, keepers, and latch mechanisms are almost always replacement items in West Palm Beach, because a corroded internal spring or flattened seal can’t be restored to like-new performance. Track reconditioning is a repair we do often. For anything load-bearing or impact-rated, we’ll always recommend replacement over repair. Call (561) 660-9539 for an exact quote – estimates are free.
Most single-window part replacements take 45 to 90 minutes on site, including testing the sash operation and sealing. Full-frame CGI window replacement in West Palm Beach takes half a day to a full day per window, depending on framing conditions. We’ll give you a straight answer when you call (561) 660-9539.
We carry the most common CGI service parts on our trucks – balances, shoes, keepers, latch mechanisms, and weatherstripping for current and late-model series. If your window is an older or less common series, we can usually source OEM or trusted aftermarket parts within a few days. Call (561) 660-9539 with your model info and we’ll tell you what’s in stock before we even schedule.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.