Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Roof Repair in West Palm Beach: What to Know First
CWS roof repair in West Palm Beach means fixing the damage before a small leak becomes a ceiling replacement, and we do it as an independent CWS service provider, not a manufacturer line. Most CWS repairs we handle are completed same week, with the parts sourced and the pricing laid out before we touch the roof. Expect an honest number up front, no trip charge inside our home county, and a repair that’s covered by the Done Right Promise.
This page is for CWS homeowners in West Palm Beach and the surrounding neighborhoods who want a repair crew that actually knows the brand. If that’s you, call (561) 660-9539 and a live person picks up. No voicemail loop, no call center.
How CWS Products Fail - and How We Fix Them
- CWS Estate Collection shingles with lifted seal strips. The Estate line uses a laminated shingle with a heat-activated sealant, and in West Palm Beach’s wet-dry-wet cycle, we repeatedly see the seal strips let go along the eaves. Wind gets under the shingle, lifts it, and suddenly you’ve got a leak that wasn’t there in October. We reset the shingles and, where the sealant has hardened past saving, we use a compatible adhesive rated for the Estate granule profile. It’s a detail most crews miss, and it’s the difference between a repair that holds and one that fails at the next storm.
- CWS reflective coating flaking on flat-roof sections. Plenty of mid-century West Palm Beach homes have flat or low-slope sections, and CWS reflective coatings on those areas break down faster here than anywhere else in Florida. The UV index combined with salt air turns a five-year coating into a three-year one. When we see flaking, we don’t just recoat. We check the flashing first, because in our experience, the coating failure is the symptom and a corroded edge detail is the disease.
- Valley metal corrosion specific to CWS installations. We’ve pulled enough CWS valleys in West Palm Beach to know the OEM valley metal on older installs was thinner gauge than the roofing itself. After a decade of leaf debris sitting in those valleys, the metal rusts through and water follows the seam straight into the attic. We replace with a heavier gauge and add a self-adhered membrane underneath. The shingles get a second life. The valley gets a first-rate one.
- Underlayment breakdown beneath CWS tile systems. CWS tile roofs look great for decades, but the underlayment underneath degrades on a schedule that doesn’t match the aesthetic. On homes in Sunshine Park and Southland Park, we regularly find underlayment that’s turned to dust while the tiles still look brand new. A repair here means lifting the tiles, replacing the paper in that section, and resetting. It’s slow work. It’s also the only work that actually fixes the leak.
- Flashing failures around CWS skylights and vents. CWS skylights have a specific flashing leg height, and when a previous repair was done with generic flashing, the overlap is short. In a West Palm Beach afternoon downpour, water runs right over it. We fabricate or source the correct profile so the flashing tucks under the CWS curb like it was designed to. Because it was.
Our CWS Roof Repair Process
- 1
The call. You reach a person, not a recording. We ask what you’re seeing, where it’s showing up, and whether it started after a specific storm.
- 2
The inspection. A background-checked, uniformed tech goes up and documents everything. Photos, measurements, and the exact CWS product line we’re working with.
- 3
The parts decision. If OEM CWS parts are available and the warranty will still honor them, we use them. If the OEM part has a known weak point, we tell you and we use the better aftermarket option. You decide with full information, not a sales pitch.
- 4
The repair. We fix the actual cause, not just the visible damage. That means pulling back enough material to see what’s underneath.
- 5
The test. We water-test every repair we do. Not every crew does. It’s the only way to know the leak is actually dead.
- 6
The guarantee. The Done Right Promise goes on every CWS repair. If it’s not done right, we make it right.
What CWS Roof Repair Costs in West Palm Beach
Here’s what CWS owners in West Palm Beach can expect, based on the jobs we run most weeks:
- Small leak repair (flashing, caulk, a few shingles): $200-$450
- Valley replacement or repair: $400-$900 depending on length and whether we’re pulling shingles
- Underlayment section replacement under CWS tile: $600-$1,200 per section
- Flat-roof coating repair with prep: $500-$1,100
- Skylight re-flashing with CWS-compatible profile: $350-$700 per unit
What moves the price: roof pitch, single vs. two-story access, how far the water has traveled, and whether the original install left us something to fix underneath. You’ll never get a surprise on the invoice. Call (561) 660-9539 and we’ll give you a written, line-item estimate before any work begins. Estimates are free.
Why West Palm Beach Homeowners Call Winslow Windows & Doors for CWS Work
We’ve been at this since 2011, and Ed Winslow’s name has been on the truck since day one. My name’s on the truck. That means something. We’re locally owned and owner-operated, with a published address and license number in West Palm Beach, not a regional office that changes managers every eight months.
We answer the phone 24 hours a day, seven days a week, with a live person. Our techs are background-checked and uniformed, so you know exactly who’s climbing onto your roof. And because we’re authorized installers across eight brands including PGT, CGI, ES Windows, and ECO Window Systems, we understand how roofs tie into the rest of your home’s exterior. That’s not a talking point. It’s what keeps a roof repair from becoming a wall leak later.
We also hold standing offers that never expire: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside Palm Beach County, and a permanent 10% discount for seniors and veterans. Those aren’t promotions. They’re how we do business.
FAQs
No, not when the repair is done correctly. As an independent CWS service provider, we follow installation practices that preserve your warranty and we document every repair with photos so you have a record if a future claim comes up. If a specific OEM part is required to keep the warranty intact, we use it and we tell you why.
Call (561) 660-9539 and we’ll look at your specific warranty documents before we touch anything.
In most cases, we can have a technician on your roof within 24 to 48 hours of your call. West Palm Beach storms don’t wait, and neither do we. If it’s actively leaking, we’ll prioritize it and walk you through temporary protection until we can get the full repair done.
Call (561) 660-9539 and we’ll give you a straight answer on scheduling.
We use OEM CWS parts when the warranty requires them or when the OEM part is genuinely the better option. But there are cases where an aftermarket part outperforms the original, like the valley metal we mentioned earlier, and we’ll tell you that plainly. You get the recommendation with the reasoning, and the final call is yours.
Call (561) 660-9539 for a free second opinion on any written estimate you’ve received.
If your CWS roof has multiple failure points, the underlayment is gone across a large area, or the decking underneath is soft, replacement starts to make financial sense. We’ll give you both numbers, repair and replace, so you can decide with clear eyes. We won’t push a replacement if a repair does the job.
The one down the road. Call (561) 660-9539 to schedule your free estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.