CWS Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

CWS Shingle, Tile & Metal Roofing in West Palm Beach: What to Know First

CWS shingle, tile, and metal roofing in West Palm Beach is work we do regularly as an independent CWS service provider, and most jobs are completed in one to two days once we’re on site. The honest price posture is this: minor repairs typically run $275-$600, moderate repairs with materials run $600-$1,200, and full roof replacements on CWS-equipped homes start around $14,000 depending on square footage and roof type.

Call (561) 660-9539

If you own a home in West Palm Beach with CWS roofing products and something isn’t right - a leak after a storm, cracked tiles, shingles lifting at the edges, or metal panels that rattle when the wind picks up - this page tells you exactly what’s happening and how we fix it. Call (561) 660-9539 and a live person answers. That’s not a slogan; that’s how Ed built this company.

How CWS Products Fail - and How We Fix Them

CWS is a solid product line, but West Palm Beach weather has a way of finding every weak point. Here’s what we see most often:

• Tile underlayment failure on CWS tile roofs. CWS tile roofs in neighborhoods like Northwood Hills and El Cid often fail not at the tile itself but at the underlayment beneath it. South Florida’s heat cycles break down the asphalt-impregnated felt faster than the tile above it wears, so by the time a homeowner sees a ceiling stain, the underlayment has been compromised for months. We pull the affected tiles, replace the underlayment section, and reset the tiles with new fasteners. Patching over old underlayment is how you end up redoing the same roof twice.
• Flashing failure at CWS metal roof seams. CWS metal roofing uses standing seams that should shed water cleanly, but we regularly find that the flashing at valleys and sidewall transitions was never properly sealed during the original install. In West Palm Beach’s afternoon downpours, water runs under the seam covers and into the deck. We remove the seam covers, reset the flashing with proper sealant and fasteners, and test with water before we leave. This is the number-one avoidable leak source on metal roofs in this area.
• Shingle granule loss on CWS asphalt shingles. The CWS asphalt shingle lines hold up reasonably well, but after eight to ten years in Florida sun we see granule loss concentrated on the south and west-facing slopes. The symptom an owner can check: granules collecting in gutters and at the base of downspouts. The real cause is UV degradation of the asphalt, not a manufacturing defect. We can replace damaged shingle sections, but if granule loss is widespread across more than 30% of the roof, we’ll tell you honestly that replacement makes more sense than endless patching.
• Cracked CWS tile from impact and foot traffic. West Palm Beach gets its share of wind-blown debris during storm season, and broken tiles are common. We also see cracked tiles where past contractors walked carelessly across the roof without using proper walk boards. Hairline cracks let water in but won’t show a full break, so we inspect every tile we step near. We replace cracked tiles with matching CWS or equal-quality tile, and we always use walk boards.
• Fastener backout on CWS metal roof clips. Metal roofs expand and contract with temperature swings. Over time, the clips holding CWS metal panels can loosen from that thermal cycling, which causes the rattling or popping sound homeowners hear in the early morning as the roof warms up. We inspect the clip spacing, replace any backed-out or corroded fasteners, and check the clip-to-panel engagement. This isn’t a cosmetic fix; loose clips mean panels can lift in high wind.

Our CWS Shingle, Tile & Metal Roofing Process

Here’s how a CWS job goes from the first call to the final walkaround:

1. 1
   Call and describe the issue. You call (561) 660-9539. A real person answers, day or night. We ask about the symptom - leak location, damaged tile, visible rust - and schedule a visit. No trip charge inside our home county.
2. 2
   On-site inspection. A background-checked, uniformed technician arrives and documents what’s actually happening. We don’t diagnose from the driveway. We get on the roof or into the attic and find the source, not just the symptom.
3. 3
   Parts and materials decision. For CWS systems, we use genuine CWS parts when they’re available and when they’re the right call. Where an equal-quality aftermarket part performs the same or better - particularly with flashing and underlayment - we tell you the trade-off in plain terms before we order anything.
4. 4
   Line-item written estimate. You get a written number before work starts. No vague allowances, no “we’ll see what we find once we open it up.” If the scope changes, we talk to you first. No surprises on the invoice.
5. 5
   The repair or replacement. Our crew completes the work with proper fasteners, proper sealants, and walk boards. We protect your landscaping and haul away the old material. For larger jobs, we manage the permit with the City of West Palm Beach and schedule the inspection.
6. 6
   Testing and walkthrough. We water-test repairs where practical, walk you through what we did and why, and confirm the warranty in writing. If it isn’t done right, the Done Right Promise says we come back and make it right. That’s a hundred years of accountability.

What CWS Shingle, Tile & Metal Roofing Costs in West Palm Beach

Here are the ranges we quote most often for CWS roof work in West Palm Beach:

• Minor shingle repair: $275-$500 (loose or missing shingles, small flashing repair)
• Tile repair, isolated area: $450-$900 (cracked or displaced tiles, underlayment patch)
• Metal roof seam or flashing repair: $350-$750 (seam re-sealing, fastener replacement, flashing reset)
• Moderate repair with materials: $600-$1,200 (larger section of underlayment, multiple tiles, valley flashing)
• Full CWS roof replacement: $14,000-$30,000+ (depends on roof type, square footage, decking repair, and permit requirements)

What moves the price: roof pitch, number of stories, how much decking needs replacement, and whether your CWS parts are in current production or need to be matched. We offer a free second opinion on any written estimate you’ve received, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (561) 660-9539 for a line-item quote - the estimate is free and there’s no trip charge inside our home county.

Why West Palm Beach Homeowners Call Winslow Windows & Doors for CWS Work

Ed Winslow grew up in Northwood Hills, so he knows what West Palm Beach roofs go through - the salt air near the Intracoastal, the July downpours, the August wind. He learned the trade at Palm Beach State College’s building construction program, and he’s spent the better part of two decades fixing exterior problems across this county. Ed’s name is on the door - and on every job we do.

We’re the locally owned, owner-operated shop that answers the phone at 2 a.m. and sends a uniformed, background-checked tech who knows CWS products. If we’re servicing your CWS roof and you have PGT, CGI, ES Windows, or ECO Window Systems windows or doors on the same house, our crew knows those lines too - so when a roof repair ties into flashing around an impact window, we’re not fumbling through a brand we’ve never touched. Upfront pricing. No surprises on the invoice. The one down the road.

FAQs