Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Impact Garage Doors in West Palm Beach: What to Know First
We install, replace, and repair Therma-Tru impact garage doors throughout West Palm Beach as an independent Therma-Tru service provider. Most replacement jobs take one to two days once your door and hardware arrive, and we quote every job with a written, line-item estimate before any work begins. Honest pricing means you’ll know the number up front, not after the old door is already off its tracks. If you own a Therma-Tru door that’s sagging, sticking, or showing rust at the seams after a few hurricane seasons, call (561) 660-9539 and we’ll come take a look.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru is better known for entry doors than garage doors, which is exactly why their garage door line trips up so many West Palm Beach homeowners. Here’s what we actually see in the field:
- Fiberglass skin delamination on the Classic-Craft series. Thirty years ago, Therma-Tru built its name on fiberglass entry doors that never rot. But garage door panels get direct western sun in West Palm Beach for six hours a day, and that heat load can separate the fiberglass skin from the foam core on older units. We catch it early during annual inspections and re-bond the panel before moisture gets in. Once water reaches the foam core, the panel is done and replacement is cheaper than any repair.
- Roller bracket pull-out on Smooth-Star doors. The Smooth-Star line uses a thinner gauge backer plate than some competing impact-rated doors. After a few thousand open-and-close cycles, the roller brackets start working loose and the door gets loud. We install reinforced backing plates at every hinge point, which changes the door’s sound from a rattle to a hum.
- Bottom seal failure after heavy rain. Any garage door in West Palm Beach takes standing water at the base during rainy season, but Therma-Tru’s older seal designs dry out and crack faster than the door itself. When the seal hardens, you get water and leaves inside the garage. We stock a commercial-grade replacement that holds up better than OEM.
- Wind-load rating drift as hardware wears. A door rated for 170 mph wind at installation doesn’t stay rated forever. Hinges wear, tracks flex, and the door loses stiffness. On Therma-Tru doors we re-torque and shim every hinge point during service calls, and we’ll tell you honestly when the door no longer meets its original design pressure for West Palm Beach code.
- Spring imbalance from foam-core weight shift. Therma-Tru panels are lighter than steel, which is good, but the foam can hold moisture in humid years and shift the door’s weight by a few pounds. A torsion spring tuned for the original weight then lifts too hard or too soft. We re-balance the spring to the door’s actual weight, not the spec sheet number, which extends spring life and keeps the opener from burning out.
Our Therma-Tru Impact Garage Doors Process
Here’s what a Therma-Tru job with us looks like from the first call to the final walkthrough:
- 1
You call (561) 660-9539. A live person answers. We schedule a time that works for you, and there’s no trip charge inside Palm Beach County.
- 2
We inspect the door, tracks, springs, and opener. We check the panel condition, measure the wind-load rating, and test the balance. You get a written diagnosis and a fixed price before we touch a tool.
- 3
We talk parts. For warranty-sensitive work, we use OEM Therma-Tru parts. For wear items like seals and rollers, we’ll show you a quality aftermarket option that outlasts the original and costs less. The call is yours.
- 4
We do the work. Our background-checked techs arrive in uniform and handle the full job, including spring replacement, track alignment, panel installation, and opener re-calibration.
- 5
We test the door for wind-load compliance. We cycle it under load, check the seal, and verify the door meets current West Palm Beach building code for impact resistance.
- 6
You walk the job with us. Every job is covered by our Done Right Promise if it’s not done right, we come back and make it right. No fine print.
What Therma-Tru Impact Garage Doors Costs in West Palm Beach
Here’s what we see in the current West Palm Beach market for Therma-Tru impact garage door work:
- Single door replacement with impact-rated panels: $2,800 to $5,200 depending on size, finish, and wind-load rating
- Double wide or hurricane-rated door replacement: $4,500 to $8,000 and up for higher design pressures
- Spring replacement on a Therma-Tru door: $280 to $520 with balancing included
- Roller and hinge replacement (full set): $180 to $420
- Bottom seal replacement: $90 to $200 including materials
- Panel re-bond or delamination repair: $350 to $800 per panel
What moves the price: your door’s wind-load requirement, whether we’re reusing your existing tracks, and whether the opener needs re-calibration after the new panels go in. We quote every job in writing before we start, and that quote doesn’t change unless you approve a change. Call (561) 660-9539 for a free estimate on your Therma-Tru door.
Why West Palm Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work
Ed Winslow started Winslow Windows & Doors in 2011, and his name is still on the truck and on every job we do. We’re locally owned with a published address and license number, not a franchise that swaps crews every six months. Our techs install eight authorized brands including PGT, CGI, CWS, and ES Windows, so when a Therma-Tru door has to integrate with impact-rated windows or a coastal-rated wall system, we understand the whole envelope, not just the garage opening. And every Therma-Tru job we do is backed by our Done Right Promise. If it isn’t done right, we come back and make it right. That’s a promise Ed can make because his name is on the work. The one down the road.
FAQs
No. As an independent Therma-Tru service provider, our repairs using OEM parts maintain your warranty coverage, and we document every part and procedure used on the job in case you ever need to file a claim. We’ll also tell you before touching equipment that’s still under coverage so you can decide whether to involve the manufacturer directly.
Common items like seals, rollers, and hinges are on our trucks most days. Full panel replacements for impact-rated Therma-Tru doors usually arrive in five to ten business days, depending on the model and wind-load rating. We’ll give you a specific availability window before we schedule anything. Call (561) 660-9539 and we’ll check inventory while you’re on the phone.
If the panels are delaminating, replacement is almost always the better play, because repaired panels fail again and a new door gets you a fresh wind-load certification in West Palm Beach. If the panels are solid and the issue is springs, rollers, or tracks, repair makes sense. We’ll show you the numbers both ways and recommend whichever actually costs less over ten years, not whichever covers our labor costs faster.
Yes, when installed as a rated assembly with proper hardware and attachments. The rating depends on the model, the panel construction, and how the tracks and jambs are anchored. We verify the design pressure on your existing door and make sure any replacement parts maintain or improve that rating. A door only resists wind properly if the whole assembly works together.
Usually, yes. Therma-Tru’s garage door finishes are designed to coordinate with their entry door collections like Classic-Craft and Smooth-Star, so matching a new garage door to an existing fiberglass front door is straightforward for our team. We’ll bring finish samples out, and when needed, our installers coordinate with the other brands we carry, PGT, CGI, CWS, and ES Windows, to keep your whole exterior looking intentional.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.