Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Shingle, Tile & Metal Roofing in West Palm Beach: What to Know First
We provide independent Therma-Tru shingle, tile & metal roofing repair and replacement throughout West Palm Beach, typically completing most repairs same-week and full roof replacements within five to seven business days depending on material availability. You’ll get a fixed, line-item quote before any work starts, and every job is backed by our Done Right Promise. If you own a Therma-Tru door or window system and need roofing work that respects the integrity of your home’s full exterior envelope, call us at (561) 660-9539. This page is for West Palm Beach homeowners who want straight answers about what their roof needs and what it’ll cost.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru makes doors and windows, not roofing products. But the failure points we see on West Palm Beach homes are almost always where the roofing system meets Therma-Tru openings, and that intersection is where leaks start, flashing fails, and water finds its way behind your siding. Here’s what we run into most often:
- Flashing separation at Therma-Tru entry doors below rooflines. On ranch-style homes in neighborhoods like Northwood Hills and Flamingo Park, the roof overhang dumps water directly above the front door. Over time, the step flashing pulls away from the door’s brickmold, and water wicks behind the Therma-Tru frame. We remove the affected shingles or tiles, re-seat the flashing with proper overlap, and replace any compromised underlayment before reinstalling.
- Improper kickout flashing at roof-to-wall transitions near Therma-Tru sliding patio doors. In West Palm Beach, summer downpours can send sheets of water down a wall. Without a kickout diverter, that water runs straight into the corner where the siding meets a Therma-Tru sliding door. We cut in a proper metal kickout, seal the transition, and test with a hose before we pack up.
- Tile roof valleys draining onto Therma-Tru door thresholds. Barrel tile roofs in communities like Sunshine Park and Roosevelt Estates often have valley terminations that drop water right at a patio door. If the valley metal is too short, water backs up under the first course of tile and drips onto the Therma-Tru threshold. We extend the valley metal, reset the tiles, and verify the threshold stays dry.
- Metal roof panel seams dripping at Therma-Tru transom windows. On mid-century homes with metal roofing and Therma-Tru transom windows above doors, a failed seam directly overhead sends a slow drip onto the transom frame. We re-seal or re-panel the seam, inspect the surrounding metal for pinhole corrosion, and treat any surface rust before it spreads.
- Shingle underlayment rot where Therma-Tru garden windows project from side walls. Garden windows create a horizontal surface directly below the roofline. In West Palm Beach’s humidity, that surface collects debris and holds moisture against the shingles. The underlayment rots, the shingles cup, and the water finds the window’s top flange. We rebuild the flashing detail, replace rotted decking, and re-shingle the affected section.
These aren’t generic roofing problems. They’re specific to how water moves off a West Palm Beach roof and interacts with Therma-Tru openings. Fixing them correctly requires knowing both systems, which is what we do.
Our Therma-Tru Shingle, Tile & Metal Roofing Process
- 1
Call and talk to a real person. You’ll get Ed or a member of the Winslow team on the phone, not a call center. We ask where the water is showing up, what the roof material is, and whether any Therma-Tru units are near the problem area.
- 2
On-site inspection at no trip charge inside our home county. A background-checked, uniformed technician walks the roof with you. We trace the leak’s path, not just its exit point. That means checking the roof surface, underlayment, flashing, and the Therma-Tru unit’s perimeter.
- 3
Written diagnosis with a fixed price. You get a line-item quote showing exactly what we’ll do, what parts we’ll use, and what it costs. No change orders, no “we found more once we opened it up” games. If you have a written estimate from another company, we’ll give you a free second opinion on it.
- 4
Parts decision: OEM where it matters, quality aftermarket where it doesn’t. For Therma-Tru doors and windows, we use genuine Therma-Tru components when replacement parts are needed. For the roofing side, we use materials that match your existing roof and meet Palm Beach County code requirements. We explain the choice and the cost difference before ordering anything.
- 5
The repair or replacement. We remove only what needs removing, protect the Therma-Tru finish with drop cloths and careful staging, and install the new materials with correct fastener patterns and sealant application per manufacturer specs.
- 6
Water test and cleanup. We hose-test every repair with you watching before we consider the job done. Then we sweep, remove debris, and leave the site cleaner than we found it. If it’s not done right, the Done Right Promise means we come back until it is.
That’s the whole process. No mystery, no subcontractors, no disappearing act after the check clears.
What Therma-Tru Shingle, Tile & Metal Roofing Costs in West Palm Beach
Costs depend on what you’ve got up there now and what’s actually wrong. Here’s what West Palm Beach homeowners can expect based on the jobs we do most often:
- Shingle repair at a Therma-Tru door or window flashing: $350-$900
- Tile roof valley or flashing repair near a Therma-Tru opening: $450-$1,400
- Metal roof seam repair and coating: $300-$850 per seam section
- Full re-roof (shingle, standard West Palm Beach single-story): $9,000-$17,000
- Full re-roof (tile): $18,000-$38,000
What moves the price: roof pitch, the number of Therma-Tru openings requiring custom flashing, underlayment condition, and whether we’re matching barrel tile or flat concrete tile. Every quote is fixed before we start, and the $40 off any repair over $200 applies automatically. Seniors and veterans get 10% off, every time, no expiration. Call (561) 660-9539 for an exact number on your roof.
Why West Palm Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work
Ed Winslow grew up in Northwood Hills, so he’s been looking at West Palm Beach roofs and the doors under them since before he could drive. He went through the building construction program at Palm Beach State College, spent summers with his father-in-law sealing drafty doors across the county, and has spent the better part of two decades fixing what the weather does to South Florida homes. My name’s on the truck. That means something.
We’re an independent Therma-Tru service provider, not a manufacturer authorized dealer. That means we work for you, not for a brand. We carry PGT, CGI, CWS, ES Windows, and Therma-Tru in our service lineup, so when a roof leak damages an adjacent door or window, we can replace the full system without juggling two companies. Every tech is background-checked and in uniform. Every call is answered by a live person, 24/7. Every job carries the Done Right Promise. We’ve been doing this in West Palm Beach since 2011, and Ed’s name, our address, and our license number are all published for anyone to check. No shell companies, no faceless call center. The one down the road.
FAQs
A properly performed roof repair that does not alter the Therma-Tru unit itself will not void a Therma-Tru warranty. The risk comes from contractors who caulk over the door’s weep holes, modify the frame, or damage the unit during roof work. We protect the Therma-Tru finish, keep weep holes clear, and never alter the frame unless structural code work requires it, in which case we document everything photographically. Call (561) 660-9539 and we’ll walk you through what your specific warranty covers.
We match barrel and flat concrete tile by brand, profile, and age where the original manufacturer still produces the tile. For discontinued tiles, we source from local salvage yards across Palm Beach County that stock West Palm Beach’s most common profiles, and we blend aged and new tiles so the repair doesn’t look like a patch. If a full tile match isn’t possible, we say so upfront and show you options before ordering anything. Call (561) 660-9539 for a free on-site look.
Repair makes sense if the roof decking is sound, the underlayment in the failed section is the only compromised area, and the shingles, tiles, or metal panels elsewhere still have useful life left. Replacement makes sense when we find widespread underlayment rot, multiple soft decking spots, or a roof age beyond 18 years for shingle and 30+ for tile. We’ll show you the condition of the decking during inspection and give you a repair quote and a replacement quote side by side. The Done Right Promise applies either way. Call (561) 660-9539 to schedule an appointment.
We answer the phone 24/7, and for active leaks we can get a technician to most West Palm Beach neighborhoods within 24 hours to tarp and stop the water. Permanent repair scheduling depends on material lead times, which we’ll confirm on the initial call. If it’s raining now and water is coming in, call (561) 660-9539 immediately; we’ll walk you through temporary steps over the phone while we dispatch.
For any roof replacement, yes. Palm Beach County requires permits for full roof replacements, and we pull them, schedule inspections, and keep a copy of the passed inspection in your file. For repairs limited to flashing, seam sealing, or a few shingles or tiles, permits are typically not required, but if the scope of work crosses into replacement territory, we handle it. We don’t cut corners on permits, because a roof that doesn’t pass inspection isn’t a roof Ed’s willing to put his name on. Call (561) 660-9539 with your address and we’ll tell you what your project requires.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.