Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterBay & Bow Windows in West Palm Beach, FL | Winslow Windows & Doors
Bay and bow windows do something no flat window can: they push the glass outward and give you back usable square footage inside the room. In West Palm Beach, where homes lean into water views and natural light, that extra projection becomes a reading nook, a breakfast seat, or simply a wider sightline across the yard. Winslow Windows & Doors supplies and installs these multi-panel configurations in laminated impact glass engineered to your specific wind zone, so you get the architectural presence without compromising the storm protection Florida demands. If you’re planning a bay or bow window project in West Palm Beach, call (561) 660-9539 to discuss your opening.
Product Overview - Bay & Bow Windows
A bay window is typically three panels: a wide fixed center lite flanked by two angled operable or fixed wings. A bow window uses four or more panels arranged in a gentler arc. Both project outward from the wall plane, and both create the same practical reward: added interior square footage and panoramic sightlines, with a shelf-like sill that becomes functional space. In a West Palm Beach living room or dining area, that projection often becomes the most-used seat in the house.
What separates a Florida-spec bay or bow window from a standard residential unit is the glass package and the way the assembly is tied into the rough opening. These are not off-the-shelf picture windows with decorative trim. Every bay or bow we quote for a West Palm Beach home is custom-fabricated to the opening, with aluminum or vinyl frame material selected for the exposure, and laminated impact glass as the standard safety layer. The projection geometry, seat depth, and mullion layout are all engineered to the wind zone the home sits in, which matters a great deal in Palm Beach County.
Because the unit extends beyond the exterior wall, wind hits it from multiple angles. That’s exactly why a bay or bow window without impact-rated glazing and a properly reinforced seat board becomes a liability in a named storm. We treat these as structural installations, not cosmetic upgrades.
Technical Specifications
- Frame materials: Aluminum or vinyl, selected by exposure and architectural style.
- Maximum size: Custom-fabricated to the opening; no standard stock sizes.
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
- Finish options: White, almond, bronze, black, tan.
- Sill options: Standard sill or extended seat/shelf sill for a true interior bench feel.
- Design pressure: Matched to your wind zone, up to +/-100. We do not over-spec beyond what the opening requires.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC High-Velocity Hurricane Zone requirements.
Hurricane & Compliance Performance
Laminated Impact Glass
The inner PVB interlayer is what holds the glass in the frame when debris strikes. The pane may crack, but it stays attached to the interlayer rather than shattering into the room. That’s the core of what makes this window a hurricane product, not just a decorative one.
Miami-Dade NOA / Florida Product Approval
Each bay and bow configuration carries its own Miami-Dade Notice of Acceptance or Florida Product Approval listing. The numbers are issued per configuration, so the exact NOA or FL number for your unit gets verified and documented on your specific quote before we order.
FBC / HVHZ Compliance
These windows are engineered to the Florida Building Code High-Velocity Hurricane Zone requirements. If you’re in West Palm Beach, you’re in HVHZ territory. An off-the-shelf bay window ordered from a national catalog won’t pass your permitting review. Ours will, because that’s the standard they’re built to from the first engineering drawing.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The bay and bow assemblies we source are tested within this framework, which is how they earn their NOA and Florida Product Approval listings.
Design Pressure Matched to Your Wind Zone
We specify design pressures up to +/-100, and never higher than the opening actually requires. Over-specifying looks impressive on paper and does nothing for you on the wall. The right pressure rating for your West Palm Beach home depends on the exposure, the building height, and the wind zone on your permit drawings.
Energy Performance Options
For coastal and western-facing elevations in West Palm Beach, Low-E insulated glass makes a noticeable difference in afternoon heat gain. The Low-E coating lives on the interior surface of the insulated glass unit, where it’s protected from the coastal air. We spec it selectively, where it pays off.
Color & Glass Options
The finish you pick should come from the home’s exterior vocabulary, not a paint-card whim. In West Palm Beach, the dominant styles lean Mediterranean revival, Key West coastal, and mid-century modern, and each has a natural window finish.
White reads crisp against stucco and is the default on many Key West and cottage-style homes. Almond softens the contrast on earth-toned or barrel-tile exteriors and hides water spots better on coastal lots. Bronze pairs with darker roof metals and works well on mid-century and contemporary homes. Black frames the view with a gallery-like edge and has become popular on new construction in the El Cid and Northwood areas. Tan blends into natural stone or shell-dash stucco without disappearing entirely.
On glass, clear laminated impact is the workhorse: maximum light, full storm protection. Tinted glass cuts glare and solar gain without adding a second surface. Low-E insulated glass is the energy performer, and we recommend it on any elevation that takes direct afternoon sun. The right choice depends on the room’s orientation and how you use it.
Installation by Winslow Windows & Doors in West Palm Beach
A bay or bow window is only as strong as the way it’s attached to the house. The NOA listing applies to a properly installed unit. If the assembly is not level, plumb, and square when it’s set, the load path shifts, and the same window that passed TAS testing in a lab can fail at the rough opening. That’s the reason we handle the installation ourselves rather than handing it to a general crew.
Our process starts with a pre-installation inspection of the rough opening, the seat framing, and the exterior wall condition. In West Palm Beach, we’re regularly working on block-framed and CBS homes where the rough opening has settled slightly over the years. We correct for that before the unit goes in. The frame gets set level, plumb, and square, then secured to the structure.
The perimeter is sealed with AAMA 812 low-expansion foam, which fills the gap without bowing the frame, then a backer rod and sealant finish at the exterior. Our installation practice follows AAMA 2400/2410 standards, which govern how a window should be installed to keep water out of the wall cavity. After the unit is in, we run a water test on the exterior, verify the drainage path, and clean up the site before we leave.
If you’re pulling a permit in West Palm Beach or any Palm Beach County municipality, the bay or bow window will need to be reflected on your plans with its product approval documentation ready. We coordinate that paperwork with your contractor or directly with you if it’s a self-managed project. Coastal exposure, wind zone, and the HVHZ review process are all things we work through on every installation.
Frequently Asked Questions - Bay & Bow Windows
The design pressure is matched to your specific wind zone, up to +/-100, and never higher than the opening requires. The exact rating for your West Palm Beach home is determined by the building’s exposure, height, and location on our design drawings, then confirmed against the unit’s NOA or Florida Product Approval listing. Call (561) 660-9539 and we’ll pull the right configuration for your address.
Because every bay and bow window is custom-fabricated to the opening, expect a longer lead time than a standard replacement window. Once we’ve measured, specified the configuration, and placed the order, fabrication and delivery are scheduled around your project timeline. We’ll give you a written schedule when we quote.
In a West Palm Beach HVHZ jurisdiction, yes. The permit package needs the product approval documentation for the exact configuration you’re installing. We provide the NOA or Florida Product Approval documentation that corresponds to your unit, and we’re familiar with how the local building departments want it submitted.
Yes. That’s the point of a custom-fabricated opening. Panel count, projection depth, seat sill depth, operable versus fixed lites, and the mullion layout are all specified around the room and the rough opening. We’ll walk you through the trade-offs between a three-panel bay and a four- or five-panel bow for your particular wall.
In coastal West Palm Beach air, rinse the exterior frame and glass with fresh water every few months to prevent salt buildup, and keep the sill track clear of sand and debris. Check the perimeter caulking annually and reseal if you see any separation. The laminated glass itself needs no special treatment beyond normal cleaning with a non-abrasive glass cleaner.
Get a Quote - Bay & Bow Windows in West Palm Beach
Ready to add a bay or bow window to your home? We’ll measure the opening, spec the right configuration, and give you a firm, written line-item quote with your product approval documentation. Call (561) 660-9539 to schedule your free on-site measurement in West Palm Beach.
Written by the team at Winslow Windows & Doors, serving West Palm Beach, FL and greater Palm Beach County.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
